How to Update Galaxy W I8150 to Official Android 4.1.2 JB XXAMH2 Firmware

1. Download Odin on your computer.
2. Download the update file on the same computer – use the download link from here.
3. Also, on the PC the Galaxy W drivers must be installed – you can use Samsung KIES for getting the drivers.
4. Unzip the downloaded files (Odin and firmware).
5. Then, install and run Odin on your computer.
6. The unzipped software must be placed on desktop.
7. Now, turn off your phone.
8. Take it and press the power, volume down and home buttons.
9. In this way download mode must be entered.
10. So, with the handset booted in download mode, connect your Galaxy W with the computer via USB cable.
11. Then, take a look on Odin: the “added” message must be displayed while ID:COM section must be yellow or blue.
12. If not, unplug the USB cable, close Odin and reinstall the Galaxy W drivers on your computer; then repeat the steps from above.
13. Good, now from Odin select “PDA”.
14. Pick the Android 4.1.2 JB XXAMH2 Firmware file from desktop.
15. From Odin click on “start”.
16. Wait while the update is being applied.
17. In the end, the “pass” message will be displayed on Odin and the ID:COM section will turn green.
18. Disconnect the phone from the computer and reboot your device.

Congratulations, you have successfully installed the Android 4.1.2 Jelly Bean XXAMH2 firmware on the Samsung Galaxy W I8150. Hopefully Android 4.2.2 or even 4.3 will be released for the same handset; we will be there for you as usual with a suitable step by step guide, so stay close. Also, if you had problems while using the steps from above, use our dedicated step by step guide and resolve the issues. For anything else, use the comments area from below and share your impressions, thoughts and opinions with our team.